Ricoh AFICIO MP 6001 Troubleshooting Manual Download Page 24

Page: 24 / 160

Problem

Cause

Solution

"You do not have the
privileges to use this function."
continues to be displayed
even though you have
entered a valid user name.

The logged in user name does
not have permission for the
selected function.

Contact the administrator about the
permission for the required function.

An error message remains,
even if misfed paper is
removed.

• When a misfeed

message appears, it
remains until you open
and close the cover as
required.

• Paper is still jammed in

the tray.

Remove misfed paper, and then open
and close the cover. See p.121
"Removing Jammed Paper".

Original images are printed
on the reverse side of the
paper.

You may have loaded the
paper incorrectly.

Load paper correctly. Place paper in the
paper tray with the print side down. LCT
and Bypass tray with the print side up.

Misfeeds occur frequently.

The tray's side or end fences
may not be set properly.

• Remove the misfed paper. See

p.121 "Removing Jammed
Paper".

• Check the side or end fences are

set properly. Also, check the side
fences are locked. See "Changing
the Paper Size", About This
Machine

Misfeeds occur frequently.

Paper of undetectable size
has been loaded.

• Remove the misfed paper. See

p.121 "Removing Jammed
Paper".

• If you load a paper size that is not

selected automatically, you need
to specify the paper size with the
control panel. See "Changing to a
Size That Is Not Automatically
Detected", About This Machine

1. When the Machine Does Not Operate As Wanted

Summary of Contents for AFICIO MP 6001
































































































































































Search results

Summary of Contents for AFICIO MP 6001

Reviews:

Related manuals for AFICIO MP 6001

Brands by name

Popular brands

Ricoh AFICIO MP 6001, Troubleshooting Manual

Search results

Summary of Contents for AFICIO MP 6001

Reviews:

Related manuals for AFICIO MP 6001

Brands by name

Popular brands