GTR058 Installation Manual:
Rev 22
13
Step 02: Set the Motor to Manual Mode:
Remove the release plug on the top of the gate arm, insert the release key, and turn the key 90°
clockwise. This puts the gate arm into manual mode, allowing the gate arm to be manually extended
and retracted. To restore normal operation, turn the key 90° anti-clockwise.
Step 03: Positioning the Gate Bracket & Opener:
With the gate arm fully retracted and the gate in the fully open position, place the gate arm with the Post
Bracket Assembly on the gate post and Gate Bracket on the gate. Position the Post Bracket Assembly and Gate
Bracket so that the gate arm is level. While holding the gate arm level, temporarily secure it with two C-clamps.
Fig 6
Fig 7
Post Bracket
Assembly
Gate
Opener
Gate in the Open Position
Gate
Bracket
Clamp
Clamp
Clamp
Fence
Post
