GTR058 Installation Manual:
Rev 22
30
Push to Open Limit Switch Settings
Fig 29
A: Open position limit switch
By sliding this limit switch towards
the centre, you will reduce the final
closed position of the gate.
B: Close position limit switch
To adjust your final closed position of your Push to Open
gate adjust limit switch B towards the centre. Be careful not
to move this switch much further to the right.
Do not proceed any further until you can achieve your full range of
motion with everything positioned using clamps!
Fig 28
Inside Property
Outside Property
Please Note:
Each swing arm contains
an internal thread that may separate if
overextended. If overextended a “Click” may
be heard, to re-connect push and screw the
arm Clockwise until the arm begins to
retract by hand.
