GTR058 Installation Manual:
Rev 22
11
Step 01: Assembling the Post & Pivot Bracket:
Fig 2
Fig 3
1.
Insert the M10 x 30 bolt through the center hole of the post
bracket and post pivot bracket as shown in Figure 5. Place a ø10
washer, ø10 spring washer and M10 nut on the bottom of the bolt
and hand tighten so that the pivot plate can swivel side to side.
2. Attach the Gate Bracket Assembly and Post Bracket Assembly to the opener by inserting the
clevis pin. Temporarily secure the clevis pins using the hairpin clips as shown in Figure 3
PLEASE NOTE:
Make sure that the assembled
post pivot bracket can swivel
freely by hand.
Lay out the parts ready to
assemble
Post pivot bracket in between
the two post brackets
Insert the M10 x 30 bolt through
the hole in the post pivot bracket
Add the ø10 washer
Add the ø10 lock washer
Secure in place with the M10 nut
Before starting we recommend watching the installation video that can be found at:
richmondau.com/product/gtr058-double-swing-gate-opener/
This video will give a detailed overview of the installation process and will serves as a useful aid during installation.
