GTR058 Installation Manual:
Rev 22
10
Gate Preparation:
Check that the swing gate is correctly installed and level, and that the gate hinges/bearings are greased and in good
condition. Any misalignment or binding in the setup of the gate may cause problems with the gate opener or difficulties
opening the gate.
This gate arm is to suit Pull-to-Open installation, in which the gate opens into the property. The gate arm can also be
used for Push-to-Open installation, see Page 27 of this manual for more details.
Ensure that the gate does not open into public areas.
The gate opener connects to the gate and to the gate post. The Post Brackets can be fitted to a round or square post.
When mounting the Post Brackets, use bolts long enough to pass through the entire post.
M10 x 200m bolts are included.
Concrete anchors are not provided.
When mounting the Post Brackets to wooden posts, a larger-size washer or metal plate should be used between the
bolts and the wooden post to ensure the stability of the fastening hardware.
If the post is smaller than 6" diameter
or square, it should be made of metal and set in cement.
Fig 1
