GTR058 Installation Manual:
Rev 22
29
Positioning the Gate
Bracket & Opener
for Push to Open
Installation:
With the gate arm fully retracted
and the gate in the fully open
position, place the gate arm with
the Post Bracket Assembly on the
gate post and Gate Bracket on the
gate. Position the Post Bracket
Assembly and Gate Bracket so that
the gate arm is level. While holding
the gate arm level, temporarily
secure it with two C-clamps.
Fig 26
Gate
Opener
Push to open
bracket GTR059
(sold separately)
Gate in the Open Position
Clamp
Clamp
Fence
Post
With the gate motor attached with clamps (while the gate motor is unlocked in manual mode)
ensure your gates range of motion is past your ideal closed position & can fully open.
If you cannot achieve your desired range of motion with the gate in manual mode refer back to the table on
page 28 (Fig 26) and make any adjustments to the pivot bracket and gate bracket required to achieve full
range of motion.
Fig 27
Inside Property
Outside Property
