GTR058 Installation Manual:
Rev 22
24
Pairing Additional Remote Controls
While the power is on, and the control box cover is removed, press the button ‘LEARN’ on the control board,
until the LED turns on, then release the button. While the light is on, press the first button on the remote
control twice, the LED will flash repeatedly and then turn off when remote control is paired. Up to 10 remote
controls can be paired. Refer to Figure 18.
Clearing Remote Controls
To delete all paired remote controls, press and hold the button ‘LEARN’ for approx. 8 seconds. When the
‘LEARN’ LED turns off, all previously paired remote controls that will be deleted. (refer to fig 19)
Fig 19
LED Display
Learn Button
Please Note:
The two remotes that come with this kit are already paired and ready for use.
If the remotes need to be paired again, or you wish to pair additional remotes, please follow the steps below.
Additional remotes can be purchased separately.
Part number: GTR054
