GTR058 Installation Manual:
Rev 22
15
Step 04: Setting the Minimum Clearances:
Make sure that there is a minimum clearance of 2.5cm between the gate and the gate
opener, to prevent the gate opener touching the gate while opening.
Please Note:
Each swing arm contains an internal thread that
may separate if overextended. If overextended a “Click” may
be heard, to re-connect push and screw the arm Clockwise until
the arm begins to retract by hand.
Gate in the Closed Position
Be sure the gate opener and
the bracket are not binding
Gate in the Open Position
2.5cm (1") minimum
2.5cm (1") minimum
Pinch
Area
Pinch Area
Fig 10
