GTR058 Installation Manual:
Rev 22
14
with the gate motor attached with clamps (while the gate motor is unlocked in manual mode) ensure
your gates range of motion is past your ideal closed position & can fully open.
If you cannot achieve your desired range of motion with the gate in manual mode refer back to the table on page 12
(Fig 5) and make any adjustments to the pivot bracket and gate bracket required to achieve full range of motion.
Do not proceed any further until you can achieve your full range of
motion with everything positioned using clamps!
Fig 9
Fig 8
Inside Property
Inside Property
Outside Property
Outside Property
Please Note:
Each swing arm contains
an internal thread that may separate if
overextended. If overextended a “Click” may
be heard, to re-connect push and screw the
arm Clockwise until the arm begins to
retract by hand.
