GTR058 Installation Manual:
Rev 22
18
Step 08: Connecting the Gate Arm:
•
Ensure that the control box is installed on the side of Gate Motor 1.
•
Connect the Motor Plug on the Gate Arm to the socket on the control box
labelled Motor 1 and tighten the sealing nut.
• Connect the Motor Plug on the second Gate opener to the socket labelled
Motor 2 and tighten the sealing nut.
Note: It is recommended that Gate Motor 1 is installed as the Primary gate
opener, and Gate Motor 2 is installed as the Secondary gate opener.
Optional accessories can be wired into the control box by feeding the cable through the extra cable
glands fitted to the control box. Feed the cable through a gland, ensure enough cable length to wire the
cable to the circuit board and retighten the gland to secure the cable.
Refer to Figure 20 for details on how to connect optional accessories to the control board.
Fig 16
Fig 17
