~DESCRIPTIONS OF FUNCTION CODE SETTINGS~
- 70 -
Settings
Function
code be
affected
Descriptions of DIP
functions
Settings
Function
code be
affected
Descriptions of DIP functions
ON: Carry frequency at
2.5KHz
0
none Useless
8 F_081
OFF: use KP-201C set
the carry Frequency
ON: start with the
FWD/REV terminal
ON: restart after
instantaneous power
interruption
1 F_001
OFF: use the
KP-202C start
9 F_078
OFF: use KP-201C set
the restart after
instantaneous power
interruption
ON: start with the
FWD terminal
ON: Free run stop
2 F_001
OFF: use the
KP-202C start
10 F_082
OFF
: use
KP-201C
set
stop
ON: frequency set by
terminal
ON: Reversal rotation
inhibit
3 F_002
OFF: frequency set
by KP-201C primary
speed or
KP-202C
setting (Re.A)
11 F_083
OFF: use KP-201C set
the reversal rotation
ON: STOP key
unavailable
ON: Non AVR function
4 F_003
OFF: use the
KP-201C set STOP
12 F_093
OFF: use KP-201C set
AVR function
ON: Base frequency
at 50.00
ON
:
motor over load
protection unavailable
5 F_034
OFF: Base frequency
at 60.00
13 F_046
OFF: use KP-201C set
the motor over load
protection
ON: unavailable for
stall prevention
during deceleration
ON: inverter over load
protection unavailable
6 F_074
OFF: use KP-201C
set the stall
prevention during
deceleration
14 F_094
OFF: use KP-201C set
inverter over load
protection
ON: Non DC braking
ON: energy saving
device available
7
none
OFF: DC braking
15 F_102
OFF
: use KP-201Cset the
energy saving device
(Re.A) When none of the F_110~F_112
、
F_117 set to 0, then the
frequency command set by the KP-201C primary speed; when one of the
F_110~F_112
、
F_117 set to 0, then frequency command set by KP-202C
ADJ4~ADJ6 or setting potentiometer.
