~
OPERATIONS OF KEYPADS ~
- 21 -
A
V
Hz
KEYPAD
A
V
Hz
KEYPAD
A
V
Hz
KEYPAD
A
V
Hz
KEYPAD
A
V
Hz
KEYPAD
Speed(RPM)
Change the setting
of speed to 2400RPM
FUN
DATA
FUN
DATA
Flashing LED denotes
that the function of
key is valid
Store the new setting of speed
in EEPROM of inverter
Store the new setting of speed
in EEPROM of inverter
Flashing LED denotes that
the function of
key is valid
Change the setting
of speed to 1401RPM
A
V
Hz
KEYPAD
A
V
Hz
KEYPAD
STOP
RESET
Main display
(output frequency)
RUN
The frequency is outputted
when this key is pressed
Main display
(output frequency)
Press this key to stop
frequency output
E. In the monitor mode, the frequency command, speed (RPM) and
line velocity (MPM) can be changed. For example, the setting
diagram of changing speed is shown in the figure below.
a. In the monitor mode, and on keypad are used to
increase and decrease speed, respectively.
b. After speed setting, the LED of keypad is flashing with the value
of setting, press within 5 seconds to store speed setting.
F. Only in the monitor mode, the frequency output can be controlled
by
pressing
and .
F U N
D A T A
R U N
S T O P
R E S E T
