REFUdrive 500 RD51
Basic parameterization
5-1
DOK-RD500*-RD51*******-IB01-EN-P
5 Basic
parameterization
5.1 Parameterizing
There are two possibilities of parameterizing the REFUdrive 500 equip-
ment series:
1. Basic parameterization: In this case, the operator can use menu-
prompted, pre-defined functions for simple and fast start-up. This is
extremely versatile, for example, control- and setpoint sources can be
configured, status messages, analog values can be called-up and im-
portant basic functions can be parameterized. When supplied, the
basic parameterization is selected. Only the basic parameterization is
described in this section.
2. Free parameterization: In this case, the full functional scope of the
units can be utilized. Logic gates, comparators, a technology control-
ler, several multi-function blocks and many more functions are avail-
able. The description of the free parameterization is provided in the
“function charts and parameter lists” manual.
Structure of the basic parameterization
The basic parameterization, comprises three main menus:
Selected parameters for fast start-up (motor adaptation, accelerat-
ing/decelerating time....)
Menu-prompted individual adaptation of the drive converter
Adaptation possibilities can be directly selected
The main menu of the basic parameterization is displayed by pressing the
Prog
button. The main menu is sub-divided into additional levels. The
structure of the various menu levels is shown in the following diagram.
Quick Setup
Prompted parameterization
Numerical list
LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01
