4-2
Operator control and parameterization
REFUdrive 500 RD51
DOK-RD500*-RD51*******-IB01-EN-P
Monitoring using the operator panel (monitor)
Button
Menu level
Esc
Return to the previous menu item
Mon
Change into the monitor.
Prog
Change into the parameterization.
Enter
Accept the selected menu item.
To the previous menu item.
To the next menu item.
Fig. 4-3: Key functions when monitoring
Parameterizing using the operator panel
The basic parameterization is described in detail in Section 5.
Button
Menu level
Parameterization level
Esc
Return the previous menu
item
Reject the changed value.
Mon
Change into the monitor.
Prog
Change into the param-
eterization.
The value is temporarily accepted.
All of the values are only accepted
after the “Enter“ button has been
pressed.
Enter
Accept the selected menu
item.
Accepts the changed value.
To the previous menu item.
Increases the value.
To the next menu item.
Reduces the value.
Jumps to the end of the list.
Cursor is positioned to the right.
Jumps to the beginning of
the list.
Cursor is positioned to the left.
Fig. 4-4: Key function when parameterizing
Fast parameterization using various key combinations
Taste
Response
The first selection text for text parameters is directly selected.
+
When these keys are pressed at the same time:
– all of the parameter numbers are set to 0 (numerical list).
– the complete parameter value is set to 0 (for numerical parameters).
– the text selection is continued in steps of 10 (practical, e.g. for parameter P0875 with
almost 100 selection texts).
– sets the standard value.
The last selection text for text parameters is directly selected.
+
When these keys are pressed at the same time, the active value is set to the factory setting.
LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01
