REFUdrive 500 RD51
Description
1-1
DOK-RD500*-RD51*******-IB01-EN-P
1 Description
1.1
The REFU
drive 500
drive converters
REFU
drive 500
is a state-of-the-art three-phase drive system for various
types of synchronous- and induction motors which can be universally
used. The drive converters can be flexibly adapted to the particular drive
task as a result of the modular hardware and software design.
The system includes various versions of AC drive converters (with/without
braking chopper, line contactor etc.) inverters for DC rectification as well
as rectifier- and regenerative feedback converters. The modules can ei-
ther be used individually or combined in groups, completely connected-up
in cabinets.
The power sections are designed for rear cooling. This allows forced air
cooling to be implemented outside the cabinet for higher degrees of pro-
tection (where the heat sink extends through the rear panel or heat
transfer plates). Versions are also available with liquid cooling, with inte-
grated or external heat exchanger.
Handling
Special importance was placed on simple handling:
•
simple commissioning via Quick-Setup
•
prompted start-up using the operator panel with graphics display
•
highest level of user-friendliness using a PC with the high performance
REFUwin software package
Electromagnetic compatibility
The AC drive converters have integrated radio interference suppression
filters and line reactors to reduce the harmonics fed back into the line
supply. REFU
drive 500
completely fulfills the EMC Directive in reference
to the noise immunity and noise emission according to the EMC Product
Standard for electric drives EN 61800-3, EN 55011 Class A (IEC 1800-3).
REFU
drive 500
units are in conformance with noise immunity specifica-
tions according to EN 50082-2.
Technical features
•
AC or DC power supply
•
Either forced air cooling, heat transfer plates or liquid cooling
•
Removable 4-line graphic display with copy function
•
Various interfaces for operating observing, and parameterizing (“down-
load” parameterization) the drive system:
•
Profibus DP
•
Interbus S
•
CAN-Bus, also with fiber-optic cable
•
RS 232 / RS 485
•
Peer-to-peer coupling with fiber-optic cable for fast communications
between several drives
•
Expanded, freely combinable technological functions:
•
PID, PI controller, AND, OR, XOR, RS flip-flop, D latch and Sample &
Hold module
•
Mathematical function elements
•
Timers, counters, comparators, ramp-function generators
•
Double overload for 0.5 sec
LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01