REFUdrive 500 RD51
Mechanically installation
2-7
DOK-RD500*-RD51*******-IB01-EN-P
•
First mount the line filter, and then above it the mounting panel with
drive converter and heat exchanger. In order that the cooling air can
freely flow, the two mounting panels must be mounted below one
another as illustrated in the dimension drawing. The busbars to
connect the line filter and drive converter are supplied.
•
The control transformer to connect the fan in the drive converter must
be mounted at a suitable position in the cabinet.
•
Mount the external heat exchanger at the required location. Connect
the cooling water circuit of the drive converter to the heat exchanger
via cooling hoses; refer under 2.5 "Working on the cooling-medium
circuit" for additional information. Depending on the particular
requirements, the cooler hoses must be ordered together with the
drive converter. Refer to the Technical Lists 2000 for additional
information on the cooler hoses, hose clamps, couplings, angular
connections, etc.
Dimension drawing of the drive converter and line filter without heat
exchanger, size G
330 (13)
360 (14.2)
380 (15)
390 (15.3)
850 (33.5)
1350 (53.1)
Connections, cooling ciruit
Fan
Cooling air
895 (35.2)
Mounting de
vices with lugs
on
ready
alarm
Esc
Start
Mon
Stop
Prog
Enter
Drilling template
Side view
Front view
Dimension in mm (inch)
12 (0.5)
200 (7.9)
400 (15.7)
420 (16.5)
3 x M8
5 x M8
2 x M8
480 (18.9)
Abb. 2-7: Dimension drawing converter size class G without heat exchanger
LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01
