13
10. Required tools and material
For use, calibration and maintenance
• Hex keys 2.5 mm / 3 mm / 4 mm
• External hex key socket wrenches 7 mm / 8 mm
• External hex key open-ended wrenches 5.5 mm / 7 mm / 8 mm / 11 mm
• Special adhesive tape in order to improve adhesion at certain filaments (e.g. PLA); our recommendation: blue adhesive tape, Conrad order
no. 1093104
For possible repairs
• Different screwdrivers (cross-head and slotted)
• Hex key 1.5 mm / 2 mm / 2.5 mm / 3 mm / 4 mm
• External hex key socket wrenches 4 mm / 5.5 mm / 7 mm / 8 mm
• External hex key open-ended wrenches 5.5 mm / 7 mm / 8 mm / 11 mm
• External hex key open-ended wrench (flat) 10 mm
A hexagon socket wrench or a hexagon spanner may be used in some cases.
• Hammer
• Stop angle
• Calliper
• Wire cutter
• Combination pliers, small flat pliers and small long-nose pliers
• Threadlocker varnish, medium strength
• Feeler gauge 0.3 mm, 0.8 mm, 0.9 mm 1.0 mm (recommended up to 1.0 mm in 0.05 mm steps)
• Hot-glue gun (optional)
