Reichert Univar, User Manual

Page: 55 / 73

D13
Intermediate transformer
1. main switch
2. power connection
3. voltage selector
⚫ The intermediate transformer is used if the
supply voltage differs from 220V. It is installed
upstream of the other power supplies.
⚫ The line connection is via connector
➁
.
⚫ To set the desired line voltage, go to the voltage
selector
➂
, push the button in the middle, turn
clockwise, and remove together with the fuse. Insert
a coin or screwdriver blade in the now visible slot
and adjust the red line to the desired voltage by
turning. Then insert a fuse corresponding to the
modified power supply voltage, and replace the
button into the voltage selector.
⚫ The fuse to be used for line voltage of 110-125V
is 10A; for 150V is 6.3A; and for 200-240V is 4A.
⚫ The main switch
➀
on the front powers all of the
power supplies.
Power supply for HBO 200W/2 mercury-vapor
high-pressure lamp
4. Start button not function
5. main switch
6. indicator light
7. ammeter
8. voltmeter
9. fuse, 4A
10. socket for power cord
11. connection for connection cables of the lamp
house 50
12. hour counter
⚫ The device is suitable only for 220V line voltage.
A special intermediate transformer is required for
different line voltages.
⚫ Press main switch
➄
to turn on the lamp, then
ignite lamp with red start button. See instructions on
page D10.