manualshive.com logo in svg

Reichert Univar, User Manual

Get the most out of your Reichert Univar with our comprehensive User Manual. This manual covers all the features and functions of the product, ensuring you operate it efficiently. Download your free copy from our website and enhance your experience with the Reichert Univar.

Share
Download
background image

Table of contents

A) Setup and assembly.................………………..................................................................... A1

B) Univar transmitted-light setup

Transmitted-light brightfield microscopy……................................................................. B1
Transmitted-light darkfield microscopy…………............................................................. B3
Transmitted-light phase and anoptral contrast……....................................................…..B5
Transmitted-light microscope with polarized light …....................................................…B7
Transmitted-light interference contrast……………....……….………………….......................B9
Transmitted-light brightfield fluorescence…………………………………..................……….. B11
Transmitted-light darkfield fluorescence……………………………….……............…………… B13
Simultaneous contrast fluorescence with transmitted-light...……………………….....……. B15
Simultaneous darkfield fluorescence with transmitted-light ………......………............…. B17

C) Univar epifluorescence attachment

Immunofluorescence using epifluorescence ............……………….………………………...… C1
Conventional fluorescence and quinacrine using epifluorescence ......................…..….. C3
Detection of aromatic amines using epifluorescence ..........………………………..……...... C5
Mixed illumination: epifluore transmitted-light darkfield, &

 epifluore transmitted-light darkfield fluorescence ...………….........…… C7

Mixed illumination: epifluore transmitted-light phase and anoptral contrast .. C9
Mixed illumination: epifluore transmitted-light interference contrast ..……..... C11
Mixed illumination: epifluore transmitted-light polarization …………...……...... C13

D) Mirror & lamp houses and connections

Mirror house 4 ........…...…………………………………………………………………………..........D1
Mirror house 2 ........……...………………………………………………………………………..........D3
Lamp house 10 .....………………………………………………………………………………........... D5
Lamp house 25 .....………………………………………………………………………………........... D7
Lamp house 50 .....………………………………………………………………………………........... D9
Power supply housing .………………………………………………………….……………….......... D11
Power supply for 100W 12-volt halogen lamp .......…………………………….…………....…..D11
Power supply for HBO 200W/4 or CS 200W/4 mercury-vapor high-pressure lamp ......... D12
Power supply for CSI 250W/1 metal-halide short-arc lamp ....………………………….….... D12
Intermediate transformer...…………………………………………………………………………..... D13
Power supply for HBO 200W/2 mercury-vapor high-pressure lamp .….......……….……... D13
Power supply for XBO 450W xenon lamp .……………….....……………………...…………..... D14
Remote control device for the control unit to the XBO 450W xenon lamp .....…........…..D14

Summary of Contents for Univar










































































Reviews:

No comments

Related manuals for Univar

Accu-Scope 3012-LED Manual preview
3012-LED
Brand: Accu-Scope Pages: 15
Accu-Scope 3019 Manual preview
3019
Brand: Accu-Scope Pages: 19
Accu-Scope 3002-CB Forensic Comparison Series Manual preview
3002-CB Forensic Comparison Series
Brand: Accu-Scope Pages: 19
AmScope B110C Product Manual preview
B110C
Brand: AmScope Pages: 10
AmScope B100 Operation Instruction Manual preview
B100
Brand: AmScope Pages: 16
Levenhuk LabZZ MTB3 User Manual preview
LabZZ MTB3
Brand: Levenhuk Pages: 16
Sun Telecom SUN-HMS200 User Manual preview
SUN-HMS200
Brand: Sun Telecom Pages: 8
Topcon SL-D301 User Manual preview
SL-D301
Brand: Topcon Pages: 56
Topcon SP-3000P Instruction Manual preview
SP-3000P
Brand: Topcon Pages: 79
Reichert 2071H Reference Manual preview
2071H
Brand: Reichert Pages: 12

Brands by name

Popular brands

Load more brands