Redmond RMC-M4510E User Manual Download Page 12

Page: 12 / 240

3. Remove the silicone sealing insert, if necessary. Rinse all parts of the steam valve.
4. Reassemble the valve in reverse order of disassembly. Place sealing insert back into its original position, align ledges

of the inner casing with corresponding slots on the outer casing, and press until they click into place. Screw the cap back

onto the steam valve, cover with the outer casing, and press until it clicks into place.

CAUTION! Do not twist or stretch sealing insert to avoid its deformation.

To Remove Condensate

Condensate accumulates in the special cavity on the housing around the bowl. Wipe off any condensate remaining around

the bowl with a dry cloth or tissue after each use.

To Clean Cooking Chamber

Compliance with the user manual guidelines minimizes the risk of food particles or liquids accumulating inside the cooking

chamber. However, if the inside of the chamber gets dirty, clean it to prevent improper operation or malfunction of the unit.

Before cleaning cooking chamber ensure, that the multicooker is unplugged and has completely cooled down!

Walls of the cooking chamber, surface of the heating disk, and the casing of central thermal sensor (located in the middle of

the heating disk) can be cleaned with a damp (not wet!) sponge or cloth. Remove any traces of soap or detergent if using

any to prevent unwanted odours during cooking.
If there is a foreign object in the cavity around central thermal sensor, carefully remove it using tweezers, trying to avoid

pressing on the casing of the sensor. Clean heating disk with a damp medium-hard sponge or synthetic brush, if necessary.

When the multicooker is used on a regular basis, heating disk may partially or completely change color, which does not indicate

a defect and does not affect proper operation of the unit.

Before repeated operation or storage completely dry all parts of the appliance. Store the assembled appliance in a dry,

ventilated place away from heating appliances and direct sunlight.

During transportation and storage, do not expose the device to mechanical stress, that may lead to damage of the device

and/or violation of the package integrity.
Keep the device package away from water and other liquids.

VI. ADDITIONAL ACCESSORIES

Optional accessories for the REDMOND RMC-М4510E multicooker can be purchased separately. Information on the innova

tions is available through www.redmond.company and our authorized dealers.

VII. TROUBLESHOOTING

Problem

Possible causes

Solution

Error message is displayed on the

screen: Е1–Е4

System failure, possible control board

or heating element

Unplug the appliance and let it cool

down. Close the lid until tight, plug in

the appliance failure

Error message is displayed on the

screen: Е5–Е7

The automatic overheating protection

was triggered

Do not start cooking with an empty bowl!

Disconnect the appliance from the mains,

open the lid and let it cool for 10-15

minutes, then continue cooking
Do not add water to the bowl during

operation of MULTICOOK (when the

temperature is set above 100°C) and

FRY programs
If the temperature is set above 120°C

within the FRY program and above

130°C in the MULTICOOK program, cook

with the lid open

Problem

Possible causes

Solution

The appliance does not switch on

Power cord is not connected to the ap-

pliance and (or) to the outlet

Unplug the appliance and let it cool

down. Close the lid until tight, plug in

the appliance

Faulty electrical outlet

Plug in the appliance to the working

outlet

Power supply failure

Check the voltage supply. In case of its

failure, contact an authorized organiza-

tion.

The meal is taking too long to cook

Power supply interruption (voltage

level is unstable or below the standard)

Check the stable voltage supply. If it is

unstable or below the standard, contact

an authorized organization.

There is a foreign object or particles

between the bowl and the heating ele-

ment.(litter, grain, pieces of food)

Unplug the appliance and let it cool

down. Remove the foreign object or

particles.

The bowl is installed with the distortion Install the bowl properly

Heating element is dirty

Unplug the appliance and let it cool

down. Clean the heating element.

The steam comes off from under the lid

during cooking process

The tightness of

connection be-

tween the bowl

and inner lid is

broken.

The bowl is im-

properly installed

into the housing

Install the bowl properly

The lid is loosely

closed or there is

a foreign object

under it

Check for any foreign objects (litter,

grain, pieces of food) between the lid

and the housing, remove them. Always

close the multicooker lid until it clicks

into place.

Sealing rubber on

the inner lid is

dirty, deformed or

damaged

Check the condition of the sealing rub-

ber on the inner lid. Probably it needs

to be replaced.

In case you didn’t manage to eliminate the defects, please, refer to the authorized service centre.

Environmentally friendly disposal (WEEE)

The packaging, user manual and the device itself shall be taken to the applicable collection point for the recycling

of electrical and electronic equipment. Do not throw away the electronic waste to help protect the environment.
Old appliances must not be disposed with other household waste but must be collected separately. Municipal

disposal of recyclable wastes is free of charge. The owners of old appliances are required to bring it to a waste

facility centre. With this little extra effort, you can help to ensure that valuable raw materials are recycled and pollutants are

treated as appropriate.
This appliance is labelled in accordance with European Directive 2012/19/EU — concerning used electrical and electronic

appliances (waste electrical and electronic equipment WEEE).
The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.