Instruction manual
Page 152 / 189
Copyright © REA Elektronik
REA JET HR
pro
2K / 4K
V 3.5x_001 28.05.2015
5.1 The menu of the REA JET HR
pro
2K / 4K
The REA JET HR
pro
2K / 4K is equipped with an industrial rotary knob as control element.
5.1.1 General navigation in the menu
The rotary knob
with touch function, the central operating element of the REA JET HR
pro
2K /
4K is used to navigate throughout all menus. The selection confirmed by pressing.
The respective menu level or the respective entry dialog can be left by pressing Back, which can be
reach at the last menu item.
Selecting submenus or jumping into a value entry field is done with the rotary knob
.
No.
Description
B1 Power
LED
B2
Display
B3
Rotary knob with touch function
B4
Power switch
B5 T
button reset factory settings (the button has to be kept pressed from
the start of the device up to the bleep.)
B6 R
button Reset, REA JET HR
pro
is restarted
B7
These LEDs represent the status of the power supply voltages 5V,
24V and 30V. Ensure that all voltages are available when starting the
device.
B8
The JOB LED indicates an activated print job. If this LED is green,
labeling can be initiated by triggering a print job. Start is only possible
if a print job had been previously assigned.
B9
Status LEDs: Shows the status of the connected print heads.
Left LED:
green:
Print head connected, print cartridge with chip inserted and locking
lever closed.
Green flashing:
Print head connected, print cartridge without chip inserted and locking
lever closed.
Right LED:
red:
Print head error. Print head connection and no ink cartridge inserted
or ink cartridge inserted and locking lever is open.
