Instruction manual
Page 99 / 189
Copyright © REA Elektronik
REA JET HR
pro
2K / 4K
V 3.5x_001 28.05.2015
3.2.4.2 Signal lamp type 2
Figure 115: Scope of delivery of signal lamp type 2
3.2.4.3 Signal lamp type 3
Figure 116: Scope of delivery of signal lamp type 3
The signal lamp offered by REA JET fulfills the requirements of
protection class IP 65.
When installing the signal lamp, it must be ensured that it can be
seen from all areas of the production environment.
This type is equipped with a mounting bracket for
lateral mounting.
The signal lamp is delivered with an integrated
cable.
The length of the cable is 6 meters.
The cable is led out downward by means of a screw
connection with strain relief.
With the mounting bracket, this type is highly
suitable for mounting to walls or constructional
elements of machines.
This type is equipped with holding magnets for quick
and easy installation.
The signal lamp is delivered with an integrated
cable.
The length of the cable is 6 meters.
The cable is led out at the side of the base by
means of a screw connection with strain relief.
With the foot magnet, this type can be directly
mounted to all magnetic surfaces without any
additional processing.
The mounting surface as well as the
surface of the magnetic foot must be
free from soil or other particles.
Contamination in this area can reduce
the holding capacity of the magnet
considerably.
.
