Ransomes Commander 3520, Safety, Operation & Maintenance Manual

Page: 61 / 186

en-59
9 ADJUSTMENTS
driver leaves his/her seat) must be checked for
proper function
If malfunctions are detected, the vehicle must not be driven.
– INCREASED RISK OF ACCIDENT –
Loads must not be placed on seats with a built in switch, except for the driver’s weight during normal use, as the
vehicle may otherwise start to move by itself.
– INCREASED RISK OF ACCIDENT –
If you take off the weight from the seat while driving, this will cause the vehicle to stop.
Do not indent the bellows while there is load on the driver’s seat.
– RISK OF CRUSHING –
Make sure that the
interior of drivers seat
remains free of
foreign particles
or
liquids
.
The driver’s seat is
not watertight
and must be protected against splashes of water!
Any conversion or refitting work on a
GRAMMER
driver’s seat must be performed exclusively in
authorised
workshops
by
trained
or
suitably qualified personnel
and in adherence with the applicable operating,
maintenance and installation instructions and in compliance with all relevant national regulations.
Improper installation and assembly bear the risk of
personal injury
or
property damage
and the proper function
of the driver’s seat or mounted parts can no longer be guaranteed.
GUARANTEE
GRAMMER
can provide no guarantee for damage resulting from incorrect assembly, use
or repair of the driver’s seats.
Further details on the guarantee granted by
GRAMMER
are stated on the invoice or the
delivery note. Warranty claims against
GRAMMER
beyond the guarantee obligations described there are
excluded.