![Ransomes Commander 3520 Safety, Operation & Maintenance Manual Download Page 38](http://html1.mh-extra.com/html/ransomes/commander-3520/commander-3520_safety-operation-and-maintenance-manual_3725289038.webp)
en-36
7 OPERATION
7.3
OPERATING PROCEDURE _____________________________________________
1.
Under no circumstances should the engine be started without the operator seated on the tractor.
2.
Do not operate tractor or attachments with loose, damaged or missing components. Whenever possible
mow when grass is dry
3.
First mow in a test area to become thoroughly familiar with the operation of the tractor and control levers.
Note: To prevent damage to the reel and bottom blade never operate the reels when they are not cutting
grass. Excessive friction and heat will develop between the bottom blade and reel and damage the
cutting edge
.
4.
Study the area to determine the best and safest operating procedure. Consider the height of the grass,
type of terrain, and condition of the surface. Each condition will require certain adjustments or
precautions.
5.
Never direct discharge of material toward bystanders, nor allow anyone near the machine while in
operation. The owner/operator is responsible for injuries inflicted to bystanders and/or damage to their
property.
6.
Use discretion when mowing near gravel areas (roadway, parking areas, cart paths, etc.). Stones
discharged from the implement may cause serious injuries to bystanders and/or damage the equipment.
7.
Disengage the drive motors and raise the implements when crossing paths or roads. Look out for traffic.
8.
Stop and inspect the equipment for damage immediately after striking an obstruction or if the machine
begins to vibrate abnormally. Have the equipment repaired before resuming operation.
CAUTION
To help prevent injury, always wear
safety glasses, leather work shoes or
boots, a hard hat and ear protection
CAUTION
Remove up all debris from the site
before mowing. Enter a new area
cautiously Always operate at speeds that
allow you to have complete control of the
mower
Summary of Contents for Commander 3520
