Ransomes Commander 3520, Safety, Operation & Maintenance Manual

Page: 59 / 186

en-57
9 ADJUSTMENTS
9.8 GENERAL INSTRUCTIONS FOR GRAMMER SEATS _______________________
• The operating instructions must be read in full before use.
• The operating instructions must be kept in the vehicle and always be at hand.
• The driver’s seat may only be fitted, serviced and repaired by specialist personnel,
• In accordance with national regulations and the vehicle manufacturer’s fitting instructions.
• The national fitting regulations can be obtained from GRAMMER or from agencies of the company, or from
the vehicle manufacturer.
• A correctly functioning and individually adjusted driver’s seat is essential to your health.
• Take adequate care of your seat and have it serviced regularly to ensure that it functions correctly.
• The functional checks are to be carried out at least as regularly as vehicle services (see maintenance plan
for vehicle).
• These operating instructions should always be kept with the driver’s seat. If the seat is passed on to a third
party, it must be accompanied by the relevant operating instructions.
• For safety reasons, the installation and connection to the vehicle supply network must be carried out by
authorized specialist personnel only.
• The seat connections must be protected independently of other vehicle components.
SAFETY INSTRUCTIONS
• If you need to connect cables to the vehicle supply network, strictly observe the following instructions:
• Before you connect a seat switch, seat heater or compressor, you must obtain the relevant electrical data
for the respective vehicle with reference to voltage, protection and the kind of connections from the
manufacturer, from GRAMMER or the company’s agencies.
• For safety reasons, the installation and connection to the vehicle supply network must be carried out by
authorized specialist personnel only.
• The seat connections must be protected independently of other vehicle components.
DC Compressor Seat Heat /Compressor
12V 10A 20A
24V 10A 15A
48V 10A 10A
Seat Switch - Current Carrying Capacity
12V DC 10mA (min.)
250V DC 5A (max.)