Qvis IAPOLLO HDRT HD User Manual Download Page 218

Page: 218 / 227

209

Daily Maintenance



Please use the brush to clean the board, socket connector and the chassis regularly.



The device should be soundly earthed in case there is audio/video disturbance. Keep the

device away from the static voltage or induced voltage.



Please unplug the power cable before you remove the audio/video signal cable, RS232 or

RS485 cable.



Do not connect the TV to the local video output port (VOUT).It may result in video output

circuit.



Always shut down the device properly. Please use the shutdown function in the menu, or

you can press the power button in the rear pane for at least three seconds to shut down the

device. Otherwise it may result in HDD malfunction.



Please make sure the device is away from the direct sunlight or other heating sources.

Please keep the sound ventilation.



Please check and maintain the device regularly.

Summary of Contents for IAPOLLO HDRT HD




































































































































































































































Search results

Summary of Contents for IAPOLLO HDRT HD

Reviews:

Related manuals for IAPOLLO HDRT HD

Brands by name

Popular brands

Qvis IAPOLLO HDRT HD, User Manual

Search results

Summary of Contents for IAPOLLO HDRT HD

Reviews:

Related manuals for IAPOLLO HDRT HD

Brands by name

Popular brands