Qvis IAPOLLO HDRT HD, User Manual

Page: 103 / 227

© Copyright Qvis® All documentation rights reserved.
94
Multiple Cast Setup
Multiple-cast setup interface is shown as in Figure 5-20.
Figure 5-20
Here you can set a multiple cast group. Please refer to the following sheet for detailed
information:

IP multiple cast group address
-224.0.0.0-239.255.255.255
-
“D” address space

The higher four-bit of the first byte=
”1110”

Reserved local multiple cast group address
-224.0.0.0-224.0.0.255
-TTL=1 When sending out telegraph
-For example
224.0.0.1 All systems in the sub-net
224.0.0.2 All routers in the sub-net
224.0.0.4 DVMRP router
224.0.0.5 OSPF router
224.0.0.13 PIMv2 router

Administrative scoped addressees
-239.0.0.0-239.255.255.255
-Private address space

Like the single broadcast address of RFC1918

Can not be used in Internet transmission

Used for multiple cast broadcast in limited space.
Except the above mentioned addresses of special meaning, you can use other addresses. For
example:
Multiple cast IP: 235.8.8.36
Multiple cast PORT: 3666.
After you logged on to the Web, the Web can automatically get multiple cast address and add it
to the multiple cast groups. You can enable real-time monitor function to view the view.