Qvis IAPOLLO HDRT HD, User Manual

Page: 20 / 227

© Copyright Qvis® All documentation rights reserved.
11
Various File
Switch Ways Can switch to previous or next file or any file in current play list.
Can switch to file on other channel of the same time. (If there is a file)
Support file continuous play, when a file is end system auto plays the
next file in the current channel
Multi-channel
Playback There is 1/4/9/16-channel playback mode.
(It may vary due to different series.)
Window Zoom Switch between self-adaptive screen/full screen when playback
Partial
Enlargement When in one-window full-screen playback mode, you can select any
zone to activate partial enlargement function.
Backup
function
Backup Mode
HDD backup
Support peripheral USB backup device. (Flash disk, portable disk,
USB burner and etc.)
Support peripheral eSATA backup device.
Support network download and save
Network
Function
Network
control
View monitor channel remotely.
DVR configuration through client-end and web browser
Upgrade via client or browser to realize remote maintenance.
View alarm information such as external alarm, motion detection and
video loss via client.
Support network PTZ lens control
File download backup and playback
Multiple devices share information via corresponding software such as
professional surveillance software (PSS)
Duplex transparent COM
Network alarm input and output
Bidirectional audio.
Motion
Detection and
Alarm Motion
Detection Zone setup: support 396/330((PAL 22×18, NTSC 22×15)) detection
zones.
Various sensitivity levels.
Alarm can activate record or external alarm or screen message
prompt.
Video Loss Alarm can activate external alarm or screen message prompt.
External Alarm Support record activation function or activate external alarm or screen
message in specified period.
Manual Alarm
Control Enable or disable alarm input channel
Support analog alarm signal to specific alarm output channel.
Alarm Input
8-ch alarm input
（
You
can set normal open
or normal close type
to select the alarm
type.
）
16-ch alarm input
（
You can set normal
open or normal close
type to select the
alarm type.
）
16-ch alarm input
（
You can set
normal open or
normal close type to
select the alarm
type.
）
Alarm Output
6-channel relay
output, including one
controllable DC +12V
output port. 6-channel relay
output, including one
controllable DC +12V
output port. 5-channel relay
output
，
including
one controllable DC
+12V output port.
Alarm Relay 30V DC 2A
，
125V AC 1A
（
activation alarm
）
Interface USB Interface 3 USB 2.0 ports.
Network
connection RJ45 10M/100M/1000M self-adaptable Ethernet port
RS485
PTZ control port
Support various PTZ control protocols.
RS232
Ordinary COM (Debug),keyboard connection and transparent serial
port(COM input and output via network )
System
Information Hard Disk
Information Display HDD current status