3
rd
Generation Rack-
Mount RDMS™
125
Quasonix, Inc.
Navigation away from the screen and back does not change the setting, however, a refresh or reload of the screen
automatically resets the frame rate to the default. For information about setting the default update rate, refer to
Monitor Page Default Update Rate on the About screen, section 4.5.5.1.
Figure 210: Monitor Update Rate Adjustment
4.5.3
Configure Screen
The Configure screen may be accessed via the Configure buttons on the Network screen, as described previously, or
via the Configure option on the Header Tool bar, as shown in Figure 211.
Figure 211
: RDMS™ Browser Interface Header Tool Bar
All changes to configuration parameters are highlighted in green until the Send Settings or Refresh buttons are
activated. This is a visual reminder that something has changed.
4.5.3.1
Combiner (Optional)
A pre-detection diversity combiner is available as an option for dual-channel receivers.
If diversity combining is installed on the RDMS™, it can be enabled by clicking on the check box in the Combin
er
field, as shown in Figure 212.
Figure 212: Configure Screen, Combiner Section
When the combiner is enabled on one channel, the second channel will automatically reflect this change.
