3
rd
Generation Rack-
Mount RDMS™
96
Quasonix, Inc.
……
Figure 158: System Settings Menu, Ethernet Selection
DHCP
This is the Dynamic Host Configuration Protocol. On some networks, the DHCP assigns dynamic IP addresses to
the devices on the network
–
in other words, it assigns a new IP address each time the user connects to the network.
Some networks manage the DHCP manually.
To change the DHCP setting, press the Enter key on the keypad to toggle between On and Off.
IP Address
The IP Address must be assigned manually when DHCP is not in use on a network.
1.
To assign an IP address, use the down arrow on the keypad to highlight the IP Address (Figure 159), then
press the Enter key.
2.
Type the IP address in the IP Address entry screen (Figure 160), then press the Enter key.
3.
To exit without making a change, press the Esc key.
Figure 159: IP Address Selection
Figure 160: IP Address Entry
Subnet
The IP Subnet must be assigned manually when DHCP is not in use on a network.
1.
To assign an IP subnet, use the down arrow on the keypad to highlight the IP Subnet (Figure 161), then
press the Enter key.
