3
rd
Generation Rack-
Mount RDMS™
95
Quasonix, Inc.
Subnet is 255.255.255.0, the Gateway could be anything in the 192.168.100.X network. If no Gateway is needed (all
access to the RDMS comes from the same network it is on), the Gateway can safely be set to 0.0.0.0.
MAC
The MAC (Media Access Control) is a hardware address uniquely identifying the RDMS™ receiver on the local
communication network.
Alias
This optional parameter is used to provide an alternative name to a rack in addition to the IP Address. The default
alias name is RDMS3. The Alias is set via the Browser Interface. When using the Browser Interface (refer to Section
4.5), the alias can be used to quickly identify a particular rack in the displayed list. Examples of a rack alias might be
“RDMSLab1”, “TestLabLevel4”, or “XYZProjectRDMS”.
System IP
The System IP address for the rack unit is assigned automatically. It will always match the IP Address
unless the
RDMS is a TMoIP unit.
In a TMoIP unit, the System IP is the TMoIP address.
SD Card
The SD Card parameter provides information about the internal SD card. It includes the Manufacturer of the card,
Manufacturer ID (in hexidecimal), Name of the card (may not have one), Original Equipment Manufacturer (OEM)
ID (in hex), Hardware Revision number (in hex), Firmware Revision number (in hex), Serial Number (in hex), and
the Date of manufacture as month/year (MM/YYYY).
Figure 157: System Info Menu, SD Card Displays
4.4.2.27.2 Ethernet
The Ethernet screen, shown in Figure 158, is used to set the DHCP mode, the IP Address, Subnet, and Gateway
address.
