3
rd
Generation Rack-
Mount RDMS™
223
Quasonix, Inc.
EVTM transmitter settings may be changed as follows.
A new transmitter frequency may be typed into the Frequency field, or the user may scroll to the desired frequency
using the up/down arrow buttons. Any valid frequency may be selected. The field turns green when a change is
made, as shown in Figure 348.
As with other Browser Interface changes, click on the Send Settings button to save the new frequency. This may be
done after all of the parameters are set.
Figure 348: EVTM Embedded Transmitter Settings, Frequency Selection
Change the Mode by using the drop down menu to see the available mode list. Highlight the desired mode, as shown
in Figure 349.
Figure 349: EVTM Embedded Transmitter Settings, Mode Drop Down Menu
To change the bit rate, type the new rate (in Mbps) into the Bitrate field, or by scroll to the desired bit rate using the
up/down arrow buttons, as shown in Figure 350.
