3
rd
Generation Rack-
Mount RDMS™
13
Quasonix, Inc.
Table 4: Additional 3U Rear Panel Connectors
Name
Description
Options
Required
J23
Channel 1 RF In
-
J48
Channel 2 RF In
-
J71
MDM-25 for Status Logger Connection
-
J73
N-connector Ethernet Via Telemetry Transmitter Output
EVTM
RDMS HDMI (J74)
Currently Factory Use Only
-
J75
10 MHz Input
-
J76
10 MHz Output
-
J77
IRIG-B Time Input
TMoIP
J78
IRIG-B Time Output
TMoIP
RDMS USB (J79)
Currently Factory Use Only
-
RDMS Control (J80) RDMS Control or TMoIP Control
-
EVTM Data (J81)
RJ-45 (T568A) Ethernet via Telemetry Data
EVTM
TMOIP (J82)
RJ-45 (T568A) Telemetry over IP Data Stream Out
TMoIP
TMOIP USB (J83)
Keyboard/Mouse access for TMoIP
TMoIP
TMOIP VGA (J84)
SVGA HD-15 NetAcquire Video Out
TMoIP
Power
Supplies AC power to the unit
-
Note that AQPSK mode results in two independent bit streams out of the RDMS. The I data is available on the
normal clock and data outputs, but the Q data is only available on an MDM connector unless the user has a 3U
receiver. Refer to Table 5 for connector/pin information for I data outputs (Clock A and Data A) and Q data outputs
(Clock B and Data B).
