3
rd
Generation Rack-
Mount RDMS™
60
Quasonix, Inc.
Figure 88: Muting Timeout Entry Screen
4.4.2.19.5 Output Muting
The Output Muting option, shown in Figure 89, is used to set the muting value to On or Off. When the Output
Muting option is set to On, the receiver stops sending clock and data information when the timeout value is reached.
This option is beneficial to someone using a recorder with limited space. For example, if data is not locked to a valid
signal or is outside the valid range, the information is muted (stopped) so the recorder is not filled with bad data.
Figure 89: Advanced Menu, Muting Selection
The user may toggle the Muting value On or Off by pressing the Enter key on the front panel keypad until the
desired value displays.
4.4.2.19.6 DC Antenna
The DC Antenna option is only available when using the 5-band downconverter AND P and C bands are enabled.
The user may toggle the DC Antenna value On or Off by pressing the Enter key on the front panel keypad until the
desired value displays.
•
When the downconverting antenna is not available, this command displays only an assumed value.
•
The downconverting antenna setting only applies to C band frequencies.
