3
rd
Generation Rack-
Mount RDMS™
23
Quasonix, Inc.
4.4.1
Selecting a Receiver Channel
In a single-channel configuration all front panel keys are active for the receiver. In a dual-channel configuration,
Channel 1 will be active upon start-up by default. To toggle control between the channels, press the Select Unit key
on the front panel keypad.
Figure 17: Select Unit Key
The LCD dedicated to receiver settings that is under active control features a white header bar and green text. The
channel number displays in the top right hand corner of the screen. In Figure 18
, “CH C” designates Combiner.
When the Combiner is On, the Frequency Diversity option must be set to On to see separate Frequency selections
for Channel 1 and Channel 2.
Figure 18: Active Main Menu Settings LCD
The Please Wait message, shown in Figure 19
, displays whenever the RDMS™ is busy—
generally when processing
a command for longer than one second. This usually occurs during a Mode change, Ethernet configuration, or due to
configuration via the Browser Interface.
