
3
rd
Generation Rack-
Mount RDMS™
167
Quasonix, Inc.
Figure 291: System Information Screen, SD Card Information
4.5.5.1
Monitor Page Default Update Rate
The default receiver level update rate is set by a user from the About screen, Monitor Page Default Update Rate
parameter, as shown in Figure 292. The drop down menu provides four update rate settings for all clients connected
to the receiver. They are High, Medium, Low, and No Automatic Updates. This provides user control of the required
bandwidth for client consumption.
If a rate selection is made, click on the Update button to save the change. A message displays to remind the user to
manually restart the receiver. A system restart is required for the rate change to take effect.
Resetting to Factory Defaults does not affect this setting. Network bandwidth usage is roughly halved as you
progress through each setting from High to Low. High Update Rate is the as-shipped default setting.
A user may change the frame reset rate temporarily at the client level. For more information, refer to the Monitor
screen, Client Level Frame Rate explanation in section 4.5.2.5.
Figure 292: System Information Screen, Monitor Page Default Update Rate Field
4.5.5.2
Interfaces
The Interfaces side of the System Information screen displays the current Ethernet settings. They are read only.