![background image](http://html2.mh-extra.com/html/quantum/dxi4700/dxi4700_user-manual_3524678089.webp)
Chapter 4: Configuration Wizards
Replication Wizard
Quantum DXi4700 User’s Guide
89
Step 1: About
1. Read the information about the wizard.
2. Click
Next
to continue.
Note:
At any time while using the wizard, you can click
Previous
to return to the previous step (see
).
Figure 57:
Replication Wizard: About
Step 2: System
1. If data on this DXi4700 will be replicated to another system, enter target information under
Target DXi
).
If two targets are already specified, you must delete a target before adding another. First click
Pause
to
pause replication to the target, and then click
Delete
to remove the target.
Before specifying a target, make sure you have completed the
Replication
wizard on the target DXi.
The target DXi must be configured to allow the source DXi hostname or IP address.
You can specify up to two targets:
a. In the
Target Hostname or IP Address
box, enter the hostname or IP address of the system that
will receive the replicated data.
When entering IP addresses, never use an address that is in a reserved IP address range. To see
a list of reserved IP address ranges, click the quick tip icon
[?]
located near the IP address field.
To use hostname format, you must specify at least one DNS IP address on the
Network
page (see
).
b. (Optional) Select an encryption option: