![background image](http://html2.mh-extra.com/html/quantum/dxi4700/dxi4700_user-manual_3524678093.webp)
Chapter 4: Configuration Wizards
Replication Wizard
Quantum DXi4700 User’s Guide
93
Figure 59:
Replication Wizard: NAS Shares
Step 3: VTL Partition (DXi4700 VTL and Multi-Protocol Configurations
Only)
1. Select a VTL partition in the
Replication Settings for VTL Partitions
section to manage its
).
Note:
For help adding VTL partitions to the system, use the
VTL
).
2. To configure the partition to replicate its data to another DXi system, enter the following information
under
Send
:
a. Select the
Enable replication for selected partition
check box to enable replication for the
partition.
b. (Optional) Select the
Enable Cartridge based replication to target
check box to enable
Cartridge Based Replication for the partition, and then enter a
Sync ID
in the box.
With Cartridge Based Replication, a cartridge is automatically replicated when it is unmounted.
After replication, the replicated cartridges are immediately available on the target system.
The Sync ID is used to identify the target partition that will receive replicated data from the source
partition. The Sync ID
must
be identical to the Sync ID of the target partition on the target system.
c. Select the check box for each replication target you want to replicate the partition to. When the
partition is replicated, its data will be sent to all selected targets.
3. To configure the partition to receive replicated data from another DXi system, enter the following
information under
Receive
: