![background image](http://html2.mh-extra.com/html/quantum/dxi4700/dxi4700_user-manual_3524678058.webp)
Chapter 3: Remote Management
Accessing Remote Management
Quantum DXi4700 User’s Guide
58
Figure 33:
Login Window
If the
Login
window does not display, verify that the IP address is correct and that the network path to
the DXi4700 is valid. Also verify that you are using a supported Web browser. Then try again. If you are
still unable to access the
Login
window, contact your administrator.
Note:
The default IP address is
10.1.1.1
. The IP address can be changed during installation using
the
Getting Started Wizard
or at a later time on the
Network
).
3. Select the login type and enter the corresponding password.
l
Monitor
- Allowed to view information on the DXi4700 remote management console but cannot
make changes.
l
Administrator
- Allowed to view and change information on the DXi4700 remote management
console.
l
Service
- Allowed to view and change information on the DXi4700 remote management console.
Password changes are not allowed.
l
LDAP/AD
- Allows users assigned system access through a Lightweight Directory Access Protocol
(LDAP) or Active Directory (AD) server to log into the DXi4700 remote management console.
LDAP/AD must be enabled on the
LDAP/AD
page for this login type to appear (see
).
Note:
Passwords are limited to 32 characters. Alphanumeric characters and special characters
are allowed. Passwords can be changed on the
Access Control
).
4. Click
Login
.
5. If you log in as a user assigned to the Admin role (local or LDAP) and there were previous unsuccessful
DXi4700 logins, a dialog box appears indicating the previous number of unsuccessful login attempts for
both the current account and all accounts on the DXi4700(see
).
l
Click
OK
to continue.
l
Click
View Admin Log
to access the
Administrative Activity Log