![background image](http://html2.mh-extra.com/html/quantum/dxi4700/dxi4700_user-manual_3524678306.webp)
Chapter 9: Configuration
System
Quantum DXi4700 User’s Guide
306
Accessing Remote Management on page 57
).
1. Under
GUI Administrator
enter the following information:
Old Password
Enter the old password.
New Password
Enter the new password.
Confirm New Password
Enter the new password again to confirm it.
Additional Information
l
Disabling the GUI Administrator - You cannot disable this account unless LDAP/AD is enabled. In
addition, you must also be logged in to the system as an LDAP/AD user (see
).
l
Passwords can be up to 32 characters. Alphanumeric characters and special characters are
allowed.
l
Loss of this password will require Quantum service support.
2. Click
Apply
.
Enabling GUI Monitor Account
Use the GUI password when logging onto the remote management console as a monitor (see
).
1. Under
GUI Monitor
do one of the following steps:
l
Select the
Enable account
check box to enable the GUI monitor account.
l
Clear the
Enable account
check box to disable the GUI monitor account.
2. Enter the following information:
New Password
Enter the new password.
Confirm New Password
Enter the new password again to confirm it.
Additional Information
Passwords can be up to 32 characters. Alphanumeric characters and special characters are
allowed.
3. Click
Apply
.