![background image](http://html2.mh-extra.com/html/quantum/dxi4700/dxi4700_user-manual_3524678230.webp)
Chapter 9: Configuration
VTL Configuration
Quantum DXi4700 User’s Guide
230
Targets
Use the
Targets
page to view the current target (Fibre Channel) configuration.
To access the
Targets
page, on the
Host Access
page, click the
Targets
).
Figure 148:
Targets Page
The
Targets
page displays the
Target Port
and
WWPN
for the currently configured targets. The
Backpanel Locations
section displays a graphical representation of the Fibre Channel and Ethernet ports
as they appear on the rear of the system.
Note:
A mapped (green) status indicates the host is currently logged on to one or more Fibre Channel
target ports.
Select one or more targets and click
Reset Target(s)
to initiate a Fibre Channel reset on the selected ports.
A reset causes the ports to go through LIP (Loop Initialization Protocol).
Target Usage
Use the
Target Usage
page to view current target and device mappings for the DXi4700.
To access the
Target Usage
page, on the
Host Access
page, click the
Target Usage
).