![background image](http://html2.mh-extra.com/html/quantum/dxi4700/dxi4700_user-manual_3524678142.webp)
Chapter 6: Replication
Receive NAS
Quantum DXi4700 User’s Guide
142
Figure 89:
Failback Target Page
2. (Optional) In the
Failback Destination DXi
box, type the hostname or IP address of a new destination
system to failback the partition to. (The default destination is the original source system.)
Note:
To use hostname format, you must specify at least one DNS IP address on the
Network
).
3. (Optional) Leave the
Use Encryption
check box selected to enable encryption when sending the
snapshot to the destination. Or clear the
Use Encryption
check box to disable encryption when
sending the snapshot to the destination.
Caution:
Select 128-bit encryption if you are sending data to a DXi running a system software
version prior to DXi 2.1 Software.
Note:
AES encryption options are available only if the Data-in-Flight license is installed (see
).
4. Click
Apply
.
The snapshot is sent to the source system.
5. On the source system, in the
Snapshots List
, select the snapshot that was sent during the failback
operation and click
Recover
.
The
Recovered Partition Name
page displays.
6. (Optional) In the
Recovered Partition Name
box, type a new name for the recovered share. (The
default name is the original share name.)
7. Click
Apply
.
The share is recovered on the source system. All data stored on the share at the time the snapshot was
saved is available.The original export protocol of the share (NFS or CIFS/SMB) is retained in the
recovery process.