Chapter 9: Configuration
System
Quantum DXi4700 User’s Guide
328
Note:
The reboot takes approximately 20 minutes to complete.
3. Navigate back to the
App Specific
page (
Configuration > System > App Specific
). DAE will now
be disabled.
Enable Veeam
Enabling Veeam
l
When enabling Veeam for the first time, a password will be required.
l
Public keys cannot be configured until after Veeam has been enabled and the system has been
rebooted.
Best Practices Guide
The Best Practices Guide for Veeam Backup & Replication is available at
To enable Veeam:
1. Select the
Enable Veeam
).
Figure 209:
Application Environment - Enable Veeam
2. Select the
Allow login with password
check box.
3. Enter the following information:
