![background image](http://html2.mh-extra.com/html/quantum/dxi4700/dxi4700_user-manual_3524678214.webp)
Chapter 9: Configuration
VTL Configuration
Quantum DXi4700 User’s Guide
214
Library Model
Select the library model emulated by the partition. The library model determines the
inquiry string returned to the host by the DXi4700.
The following library models are available:
Models
l
Quantum DXi7500
l
ADIC Pathlight VX
l
Quantum Scalar i40/i80 or Quantum Scalar i6000
l
Quantum DXi6700, Quantum DXi6900, Quantum DXi6800, Quantum DXi4700,
Quantum DXi4601, Quantum DXi4500, or Quantum DXi8500
l
Quantum DX3000 or Quantum DX5000
l
Quantum PX500 or Quantum PX720
l
ATL M2500, ATL P1000, or ATL P7000
If you select a library such as the ATL P1000 or ATL P7000, the DXi4700 appears
as the selected library to the host and backup application. If you select Quantum
DXi4700, the host and backup application recognize the device as a Quantum
DXi4700.
Note:
Quantum recommends that you set the library model to Quantum
DXi4700 for best compatibility. If your backup application does not support the
Quantum DXi4700 inquiry string, select a different library model. Check your
software compatibility guide to verify what library models are supported.
Number of Storage
Slots
Enter the number of storage slots in the partition (up to 61,000).
Note:
One I/E slot is created for each storage slot up to a maximum of 240 I/E
slots.
Number of Virtual
Tape Drives
Enter the number of virtual tape drives in the partition.
Note:
If all tape drives are currently assigned to other partitions, you must
remove one or more tape drives from an existing partition to make them
available for use in a new partition.
4. (Optional) Under
Replication Settings
, specify replication settings.
For more information about configuring replication for a partition, or to set up replication for the partition
at a later time, see
5. Click
Apply
.
6. Click
Online
to return the partition to an online state.