![background image](http://html2.mh-extra.com/html/quantum/dxi4700/dxi4700_user-manual_3524678269.webp)
Chapter 9: Configuration
Scheduler
Quantum DXi4700 User’s Guide
269
Caution:
When adding multiple events of the same type, make sure the events do not overlap. If two
events of the same type overlap, the later event takes precedence over the earlier event.
Note:
After a system reboot, all open-ended events (for example, replication) will restart at their next
scheduled time. Events with end times (for example, replication throttle) that are past their start time will
have their end action occur.
Scheduling a Share or Partition for Replication
Configure a replication schedule for a NAS share or VTL partition to automatically replicate the share or
partition data to the target system at regular intervals. Disable scheduled replication if you do not want to
automatically replicate the share or partition data to the target.
Note:
Note: To schedule a share or partition for replication, you must first add one or more replication
). In addition, you must add one or more shares or partitions with
deduplication enabled and at least one target selected (see
).
Note:
Disabling replication for a share or partition, or deleting a share or partition, does not delete any
scheduled replication events for that share or partition. If you no longer want to schedule the share or
partition for replication, manually delete the schedule (see
Deleting a Scheduled Event on page 272
).
To configure a replication schedule for a share or partition:
1. On the
Scheduler
page, add or edit an event in the
NAS Replication
or
VTL Replication
row (see
Adding or Editing a Scheduled Event on page 267
).
2. In the
Share or Partition
drop-down box, select the share or partition to schedule for replication.
Only shares or partitions that are enabled for deduplication appear in the drop-down box.
Note:
Scheduling a share or partition that has replication disabled will automatically enable
replication.
3. In the
Target
drop-down box, select the replication target you want to replicate the share or partition to.
4. Click
OK
.
5. (Optional) Specify when and how often the event reoccurs (see
Setting Recurrence for a Scheduled
).
6. Click
Apply
.
Scheduling Replication Throttling
During replication throttling, the DXi4700 limits the amount of source replication data it sends to not exceed
a specified maximum bandwidth. Schedule replication throttling to control the amount of network bandwidth
used by source replication at certain times. For example, you might configure replication throttling to occur
during planned backup times to avoid network contention.