Chapter 5: Home Page
Replication
Quantum DXi4700 User’s Guide
117
Send Settings Information
Description
Target DXis
The IP address and replication status for each configured replication
target (up to two). Click to specify a replication target (see
).
Status
l
Ready
- (Green)The system is ready to perform replication.
l
In Progress
- (Blue) A replication job is currently in progress.
l
Queued
- (Blue) A replication job is queued and will continue when the
system is ready.
l
Partial
- (Yellow) A replication job was partially completed. Generate a
replication report to see the files that were not replicated (see
).
l
Manually Paused
- (Yellow) Replication was manually paused. To
resume replication, click Resume.
l
System Paused
- (Yellow) The system has automatically paused
replication due to a problem, for example, low disk space or a problem
on the target system.
To see more information about the problem that occurred, click Admin
at the top of the remote management console to view administration
alerts (see
). You may also need to view
alerts on the target DXi. In addition, make sure that the DXi is an
allowed replication source on the target DXi (see
).
l
Failed
- (Red) A replication job was not completed.
l
Internal Error
- (Red) An error occurred during replication.
Pause/Resume
The source DXi controls the replication pause behavior. To manually
pause replication between the source and target, click
Pause
on the
source DXi. To manually restart replication, click
Resume
on the source
DXi.
Note:
When the target DXi enters low disk space condition,
replication on the source DXi is automatically paused. Replication
will resume when the target leaves low disk space condition.