![background image](http://html2.mh-extra.com/html/quantum/dxi4700/dxi4700_user-manual_3524678037.webp)
Chapter 2: Basic Operations
DXi4700 Node
Quantum DXi4700 User’s Guide
37
Figure 16:
DXi4700 G2 Node - Front View
Table 1:
DXi4700 Node - Front Panel LED Indicators, Buttons, and Connectors
Item
Indicator, Button, or
Connector
Icon
Description
1
Diagnostic Indicators
The diagnostic indicators light up to display error statuses. For a
description of possible statuses, see
.
Note:
The diagnostic indicators display error statuses during
system startup.
2
Power-on indicator, power
button.
The power-on indicator lights when the system power is on. The
power button controls the power supply output to the system.
WARNING:
Turning off the power removes the main power
but keeps standby power supplied to the Node. Because of
this, you must unplug the Node before servicing.
Caution:
Turning off the power without properly shutting
down the system may result in loss of data (see
and Shutting Down the DXi4700 on page 53
).
Note:
To shut down the Node in the event of an emergency,
press and hold the power button for 4 seconds.
Warning:
This may result in data loss and may cause a delay on next
startup due to a blockpool verify operation.
3
NMI button
Not used.
4
Hard drives
Six or twelve 3.5 inch hot-swappable hard drives (4 TB each).