Prophete INDEX-14, Operating Instructions Manual, Page: 157 / 444

Eng
lish
EN 65
CHAIN
CHAIN
Clean and oil the chain at regular intervals (in particular after rides in the rain) with fine oil or chain
spray. Dab off excess oil with a rag.
CHAIN TENSION
(ONLY FOR MODELS WITH HUB GEARSHIFT)
An incorrectly tensioned chain may cause increased wear
and may cause annoying sounds during the ride. The us-
age-related elongation of the chain requires regular in-
spection of the chain tension.
CHECK CHAIN TENSION
1. Put the E-bike onto the stand.
2. Check that the chain can be pushed through up or
downwards by max. 10-15 mm (
116
).
ADJUSTING THE CHAIN TENSION
HUB GEARSHIFT WITHOUT SWITCHBOX
1. Release the axle nuts
216
on both sides of the rear wheel with a
15 or 18 mm wrench.
2. Shift the rear wheel to adjust the chain tension.
3. Ensure that the wheel is placed straight in the holder and that the
ca. 10–15 mm
215
DANGER OF ACCIDENT!
• The chain must be sufficiently lubricated at all times since it may otherwise tear.
The backpedalling brake is no longer functional then in models with a backpe­
dalling brake!
WARNING!
DANGER OF ACCIDENT!
• If the chain is not tensioned enough, it may jump off during the ride. In that
case, the back­pedalling brake will no longer be functional!
WARNING!
216
DANGER OF ACCIDENT!
• The rear wheel must be placed straight in the axle holder, since the braking or
riding performance may otherwise be impaired.
• Tighten all screws and nuts that you loosened again well. Check that the safety
washer is placed correctly. The rear wheel may otherwise come loose during
the ride! Perform a careful test ride after installation.
DANGER