Prophete INDEX-14, Operating Instructions Manual, Page: 110 / 444

18 EN
HANDLEBAR
HANDLEBAR
RIGID HANDLEBAR STEM
In a rigid handlebar step, the handlebar can be adjusted for height, position and inclination angle de-
pending on version.
SETTING THE POSITION AND HEIGHT
1. Loosen the clamp screw
41
with a 6 mm hexagon socket wrench.
2. Set the handlebar or stem position and height.
3. Tighten the clamp screw
41
again well according to the torque
specification (s. chapter Torque specifications).
SETTING THE HANDLEBAR INCLINATION
1. Loosen the clamp spindle screw
42
with a 6 mm hexagonal so-
cket wrench.
2. Adjust the inclination angle of the handlebar.
3. Turn the handlebar attachments (e.g. brake lever) back to the star-
ting position.
4. Tighten the clamp spindle screw
42
again well according to the tor-
que specification (s. chapter Torque specifications).
41
42
DANGER OF ACCIDENT!
• Ensure before every ride and after setting that the handlebar, the screws of the
handle attachment, the closure mechanics and the handlebar quick clamp are
fitted tightly!
• The handlebar must not be inclined at straight rides.
• Do not put any carrying bags on the handlebar for transporting objects, since
this may impair the riding performance. Instead, only use commercial bicycle
baskets or handlebar bags.
WARNING!
WARNING!
DANGER OF BREAK AND ACCIDENTS!
• The stem must not be pulled out beyond the maximum mark of the handlebar
shaft! The mark of the minimum insertion depth on the handlebar shaft must not
be visible. No warranty if this is not observed!