Prophete INDEX-14, Operating Instructions Manual, Page: 108 / 444

16 EN
INTENDED USE • FIRST COMMISSIONING | INSPECTIONS BEFORE STARTING A RIDE
FIRST COMMISSIONING &
INSPECTIONS BEFORE STARTING A RIDE
INITIAL OPERATION
The E-bike was delivered in the pre-installed condition for shipping-technical reasons. This means that
not all parts and screws will be tightened ex works. Before initial commissioning, you must tighten and
may have to set the following components:
• Saddle clamp • Pedals
• Headlights • Basket
• Handlebar, stem and any
handlebar attachments (such as brake grips,
bell, gearshift lever, rotary handle switch, display/operating unit)
For more detailed information about setting and installation, see the following chapters of the E-Bike
components.
BEFORE STARTING THE RIDE
Before every ride, you must check the following parts for function or tight fit:
• Charge the rechargeable battery with the enclosed charger
• Lighting
• brakes (incl. tightness at hydr. brake system) • spokes
• quick-clamp • bicycle bell
• deflection/damper/shock • saddle
• handlebar • gearshift
• pedals
• rims (check for wear and concentricity)
• tyres (check for damage and barometric pressure)
Additionally, you must comply with the intervals indicated in the maintenance plan for regular inspec-
tion and repair and observe the care and maintenance instructions (see chapter Maintenance | Care).
DANGER OF DAMAGE AND ACCIDENTS!
• Check whether your E­bike is safe for operation before every ride. Remember
that your E­bike may have fallen over when you did not see it or that third parties
may have manipulated it.
• Perform the following inspections before every ride and make any settings that
are necessary. Non­observance may lead to damage to the E­bike or failure of
important parts!
WARNING!